PT. AUTOACCINDO JAYA
a u t o a c c i n d o . c o m

home | company | contact

                     
Home Audio Car Audio Home Appliance Healthcare Beauty
 
Product Catalog:  
   
 
 

 
  
    
   
 
 
  
    
   

JL AUDIO
Amplifier

 
 
"The JL Audio 500/1 really is a professional amplifier for serious listeners"
Ken Pohlmann, Mobile Entertainment, Feb/Mar, 2001 (Review of 500/1)

"In pure audiophile terms, I doubt that you could do better then the 300/2"
Robert Zeff, Car Audio And Electronics, March 2002

"...an amp that won't quit no matter how heartlessly you drive it"
Brian Smith, CarSound, Jan/Feb, 2002 (Review of 500/1)

"Think of it as one of those 'high current' amps that has enough sense to know when it's not driving a low impedance load"
Brian Smith, CarSound, May/June, 2001 (Review of 300/4)

"This amplifier has what perfect reproduction of audio requires: good slew rate, low distortion, high damping, and high output current delivery"
Robert Zeff, Car Audio And Electronics, March, 2002 (Review of 300/2)

"It's flexibility and degree of control are head and shoulders above anything else that I've seen in an automotiveamplifier "
Brian Smith, CarSound, Jan/Feb, 2002 (Review of 500/1)

"It offers such plethora of controls that you can dial out many unwanted artifacts to get exactly the sound you're looking for"
"I've reviewed plenty of amplifiers in my time, but I've never seen a sub amp provide such a sonic tool set..."
Ken Pohlmann, Mobile Entertainment, Feb/Mar, 2001 (Revew of 500/1)

"The adaptive power supply scores some extra points where it matters - driving speakers"
Brian Smith, CarSound, May/June, 2001 (Review of 300/4)

 
 

250/1
Monoblock Subwoofer Amplifier

Specifications
Rated Power: 250W RMS @ 1.5Ω-4Ω (11V-14.5V)
THD at Rated Power: <0.05% @ 4Ω
S/N Ratio*: >95dB below rated power
Frequency Response: 5Hz - 500Hz (+0,-1dB)
Damping Factor: >500 @ 4Ω/50Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
Dimensions: 10.25"L x 9.25"W x 2.36"H

Features
Differential-Balanced Input Topology: (1 pair of inputs)
On-board Crossover: fully-variable (40-200Hz), selectable-slope LP
Preamp Output: 2-channel (full-range, LP or HP)
Bass EQ: variable boost up to 15dB
Infrasonic Filter: defeatable 24dB/octave at 30Hz
Signal-Sensing Turn-On: permits operation without remote lead
Dual mono speaker output connections: accept up to 8ga. wire
+12V and Ground connections: accept up to 4ga. wire

 
 

300/2
Two-Channel Full-Range Amplifier

Specifications
Rated Power (stereo): 150W RMS x 2 @ 1.5Ω-4Ω (11V-14.5V)
Rated Power (bridged): 300W RMS x 1 @ 3Ω-8Ω (11V-14.5V)
THD at Rated Power: <0.03% @ 4Ω
S/N Ratio*: > 108.5dB below rated power
Frequency Response: 5Hz-30KHz (+0,-1dB)
Damping Factor: >200 @ 4Ω per ch./50Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
Dimensions: 13.4"L x 9.25"W x 2.36"H

Features
Differential-Balanced Input Topology: (1 pair of inputs)
On-board Crossover: fully-variable (50Hz-5KHz), selectable-slope LP or HP
Preamp Output: 2-channel (full-range, LP or HP)
Speaker output connections: accept up to 8ga. wire
+12V and Ground connections: accept up to 4ga. wire

 
 

300/4
Four-Channel Full-Range Amplifier

Specifications
Rated Power (stereo): 75W RMS x 4 @ 1.5Ω-4Ω (11V-14.5V)
Rated Power (bridged): 150W RMS x 2 @ 3Ω-8Ω (11V-14.5V)
THD at Rated Power: <0.03% @ 4Ω
S/N Ratio*: > 108.5 dB below rated power
Frequency Response: 5Hz-30KHz (+0,-1dB)
Damping Factor: >200 @ 4Ω per ch./50Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
Dimensions: 13.4"L x 9.25"W x 2.36"H

Features
Differential-Balanced Input Topology: (2 pairs of inputs)
Front Crossover: fully-variable (50Hz-5KHz), selectable-slope LP or HP
Rear Crossover: fully-variable (50Hz-5KHz), selectable-slope LP or HP
Speaker output connections: accept up to 8ga. wire
+12V and Ground connections: accept up to 4ga. wire

 
 

500/1
Monoblock Subwoofer Amplifier

Specifications
Rated Power: 500W RMS @ 1.5Ω-4Ω (1V-14.5V)
THD at Rated Power: <0.05% @ 4Ω
S/N Ratio*: >95dB below rated power
Frequency Response: 5Hz-500Hz (+0,-1dB)
Damping Factor: >500 @ 4Ω/50Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
Dimensions: 13.4"L x 9.25"W x 2.36"H

Features
Differential-Balanced Input Topology: (1 pair of inputs)
On-board Crossover: fully-variable (40-200Hz), selectable-slope LP
Preamp Output: 2-channel (independent active filter, parallel with amp fitter or full-range)
Bass EQ: parametric with variable boost up to 15dB and Remote Bass Option
Infrasonic Filter: fully-variable 24dB/octave from 15-60Hz
Signal-Sensing Turn-On: permits operation without remote lead
Dual mono speaker output connections: accept up to 8ga. wire
+12V and Ground connections: accept up to 4ga. wire

 
 

1000/1
Monoblock Subwoofer Amplifier

Specifications
Rated Power: 1000W RMS @ 1.5Ω-4Ω (11V-14.5V)
THD at Rated Power: <0.05% @ 4Ω
S/N Ratio*: >95dB below rated power
Frequency Response: 5Hz-500Hz (+0,-1dB)
Damping Factor: >500 @ 4Ω/50Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
Dimensions: 19.7"L x 9.25"W x 2.36"H

Features
Differential-Balanced Input Topology: (1 pair of inputs)
On-board Crossover: fully-vanable (40-200Hz), selectable-slope LP
Preamp Output: 2-channel (independent active filter, parallel with amp filter or full-range)
Bass EQ: parametric with variable boost up to 15dB and Remote Bass Option
Infrasonic Filter: fully-variable 24dB/octave from 15-60Hz
Output Polarity Reversal Switch: 0° or 180°
Dual mono speaker output connections: accept up to 8ga. wire
+12V and Ground connections: accept 4ga. wire (required)

 
 

500/5
Five-Channel System Amplifier

Specifications
Front Channels: 100W RMS x 2 @ l.5Ω-4Ω (11V-14.5V)
Rear Channels: 25W RMS x 2 @ 1.5Ω-4Ω (11V-14.5V)
Subwoofer Channel: 250W RMS @ 1.5Ω-4Ω (11V-14.5V)
THD at Rated Power: <0.03% @ 4Ω (F&R), <0.05% @ 4Ω (Sub)
S/N Ratio* (F&R): >108.5dB below rated power
S/N Ratio* (Sub): >95dB below rated power
Frequency Response (front and rear): 5Hz-30KHz (+0,-1dB)
Frequency Response (sub channel): 5Hz-500Hz (+0,-1dB)
Damping Factor (front and rear): >200 @ 4Ω/50Hz
Damping Factor (sub channel): >500 @ 4Ω/50Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS Dimensions: 19.7"L x 9.25"W x 2.36"H

Features
Differential-Balanced Input Topology: (3 pairs of inputs)
Front Crossover: fully-variable (50Hz-5KHz), selectable-slope BP or HP
Rear Crossover: fully-variable (50Hz-5KHz), selectable-slope HP
Sub Crossover: fully-variable (40-200Hz), selectable-slope LP
Preamp Output: 2-channel (full-range or LP)
Bass EQ: variable boost up to 15dB and Remote Bass Option
Infrasonic Filter: defeatable 24dB/octave at 30Hz
Left minus Right Ambience Circuit: ambient effect for rear channels
Front and rear speaker output connections: accept up to 8ga. wire
Dual mono subwoofer output connections: accept up to 8ga. wire
+12V and Ground connections: accept up to 4ga. wire

 
 

 
* All S/N Ratio Specifications are A-weighted in a 20-20KHz noise bandwidth.
* Quotations used with premission.
 

 
 
 
 
 
 

home | company | contact

 
 

copyright © 2008 autoaccindo.com - all rights reserved